JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 27 products.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Knife in HW 25 degrees CSEN700014
Knife in HW 25 degrees CSEN700014
Knife in HW 25 degrees CSEN700013
Knife in HW 25 degrees CSEN700013
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1...
Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1 piece N3402N0097
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Premium Half round cutter
Premium Half round cutter
Bevel cutter with beveled bearing for solid surface Suitable...
Bevel cutter with beveled bearing for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface Suitable...
Bevel cutter with beveled bearing for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393