JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 29 products.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Guttering cutter for solid surface
Guttering cutter for solid surface
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127