Home

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

Shank 8 mm

Shank 8 mm

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Bevel cutter with bearing

Bevel cutter with bearing

Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8

Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Profile cutter CDC48

Profile cutter CDC48

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127