Chamfer bit 38.1 mm 45°
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 53 products.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Bevel cutter for folding and chamfering wood, laminate and...
Bevel cutter for folding and chamfering wood, laminate and plastic sheets.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6...
ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Bevel cutter heavy duty
Bevel cutter heavy duty
V-Groove cutter for solid surface
V-Groove cutter for solid surface
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8