JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 36 products.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Guttering cutter for solid surface
Guttering cutter for solid surface
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Guttering cutter for solid surface
Guttering cutter for solid surface
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Stark YS107BZM Multiradius roundover cutter Light alloy body,...
Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.