Home

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Shank 8 mm

Shank 8 mm

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8

Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8

Cove mould cutter for solid surface

Cove mould cutter for solid surface

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Guttering cutter for solid surface

Guttering cutter for solid surface

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Profile cutter CDC48

Profile cutter CDC48

Profile cutter RBB

Profile cutter RBB