Home

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Knife in HW R=1 N3402N0123

Knife in HW R=1 N3402N0123

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Tilted trimmer with interchangeable knives 75x20x16+2KN R=1...

Tilted trimmer with interchangeable knives 75x20x16+2KN R=1 N3401N0431

Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...

Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100