Home

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 8mm

Straight bit shank 8mm

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

T-Slot cutter

T-Slot cutter

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Half round profile cutter

Half round profile cutter

Profile cutter ROG20

Profile cutter ROG20

For solid handles and pulls on kitchen and wall unit doors,...

For solid handles and pulls on kitchen and wall unit doors, the perfect solutions for providing positive grips and softened, easy-on-the-fingers edges without the need for external hardware.