EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Cutters
Flush trim bit
There are 22 products.
Active filters
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Flush trim bit