Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Prices drop
Active filters
- Radius / Angle: 1,5mm
Face milling cutter for...
Face milling cutter for solid surface
Face milling cutter for solid surface
- -10%
- -10%
Knife in HW 16.5x16x2 R1.5...
Knife in HW 16.5x16x2 R=1.5 CCEN700012
Knife in HW 16.5x16x2 R=1.5 CCEN700012
- -20%
- -20%
Knife in HW 16x16.5x2 R1.5...
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
- -20%
- -20%
Knife in HW R1.5 N3402N0124
Knife in HW R=1.5 N3402N0124
Knife in HW R=1.5 N3402N0124
- -20%
- -20%
Tilted fine trimmer...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
- -20%
- -20%
Tilted fine trimmer...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
- -20%
- -20%
Tilted trimmer with...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1,5...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1,5 N3401N0432
- -20%
- -20%