Filter By
Shank
Diameter (D)
Total Length
Radius / Angle
Sale
Active filters
- Shank: 8mm
JVL pro-line solid carbide...
JVL pro-line solid carbide flush trim bit S8mm
JVL pro-line solid carbide flush trim bit S8mm
JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line Raised panel...
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
- On sale!
Chamfer bit 38.1 mm 45°
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
CH4 8,0x64 60°
Suitable for: Steel, Stainless steel, Cast iron, Aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum, copper and plastics
- New
EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
RS3 8,0x65
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
- New
STR2 8,0x70 R2
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
STR2 8,0x70 R0,3
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
EPROCUT Rounding over bit...
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
- -10%
- -10%
RS4 8,0x65
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
- New
ST3 7,0 x 65
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
ST4 7,0 x 65
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
- New
EPROCUT Top bearing...
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
- -10%
- -10%
STR4 8,0 x 70 R 0,3
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
- New
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
EPROCUT Rounding over bit...
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Keyhole bit HW D9.5 S8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
- -10%
- -10%