Cabezales portacuchillas

Overlapped trimmer with interchangeable knives 80 x 25 x...

Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit

Yh102AAM Body in light alloy execution. standard tungsten...

Yh102AAM Body in light alloy execution. standard tungsten carbide profiled knives. profile A mounted on cutter.Profiles B. C and D are optional.Chip thickness limitation and reduced recoil. suitable for manual feed.  Suitable for stock 22-25 mm

Stark profile counterprofile cutterhead 120x40

Stark profile counterprofile cutterhead 120x40

Helical head for medium finishing with body in light alloy...

Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges. 

Stark profile counterprofile cutterhead 120x40

Stark profile counterprofile cutterhead 120x40

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy...

Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges. 

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for...

LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines