Cabezales portacuchillas

Bore 30 mm. Cutterhead with HW reversible knives and spurs on...

Bore 30 mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

Yh102AAM Body in light alloy execution. standard tungsten...

Yh102AAM Body in light alloy execution. standard tungsten carbide profiled knives. profile A mounted on cutter.Profiles B. C and D are optional.Chip thickness limitation and reduced recoil. suitable for manual feed.  Suitable for stock 22-25 mm

Stark Grooving cutterhead 140 x 4 mm Z=4 V=4 Cutterhead with...

Stark Grooving cutterhead 140 x 4 mm Z=4 V=4 Cutterhead with HW reversible knives and spurs for making thin precision grooves 4mm

For edge processing of wood and wood-containing products such...

For edge processing of wood and wood-containing products such as MDF, chipboard MAN

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Bore 30mm Stark 45° mitre joint cutter head with replaceable...

Bore 30mm Stark 45° mitre joint cutter head with replaceable knives Cutterhead in light alloy with two knives for 45° joints for wood thickness 14 to 26mm.The joint is obtained by two subsequent working phases: the first with the piece being worked in horizontal position and the second with the...

Stark YS107BZM Multiradius roundover cutter Light alloy body,...

Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case

Light alloy body with tungsten carbide reversible profiled...

Light alloy body with tungsten carbide reversible profiled knives for panel raising for machining up to a total amount of 3 different profiles, suitable for manual feed.

Cutterhead with HW reversible knives and spurs for making...

Cutterhead with HW reversible knives and spurs for making precision grooves.

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

for high precision groove cutting, chip thickness limitation...

for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.

Kitchen cabinet set

Kitchen cabinet set

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

YS118 Bore 30mm.    Cutterset consisting of two elements in...

YS118 Bore 30mm.    Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm...

YS112AZM Set consisting of 2 profile cutters in light alloy...

YS112AZM Set consisting of 2 profile cutters in light alloy execution and an adjustable groover 8-15 mm (can also be used seperately!). for machining door profiles and counterprofiles with maximum flexibility. 5 different profiles can be mounted on the same cutterhead.set complete with spacing...

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.