Fresadoras / CNC

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Trimmers with bearing

Trimmers with bearing

Fresa con guía de rodamientos para recortar los bordes...

Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.

Trimmers with bearing

Trimmers with bearing

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.