EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 54 productos.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Straight bit shank 8mm
Straight bit shank 8mm
Trimmers with bearing
Trimmers with bearing
Fresa con guía de rodamientos para recortar los bordes...
Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.
Trimmers with bearing
Trimmers with bearing
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm