Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Trimmers with bearing
Trimmers with bearing
Fresa con guía de rodamientos para recortar los bordes...
Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.
Trimmers with bearing
Trimmers with bearing
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
