EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 103 productos.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: aluminio, cobre, plásticos.
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Bevel cutter for folding and chamfering wood, laminate and...
Bevel cutter for folding and chamfering wood, laminate and plastic sheets.
ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14°
ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14°
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Straight bit shank 8mm
Straight bit shank 8mm
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Straight bit shank 6 mm
Straight bit shank 6 mm
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Trimmers with bearing
Trimmers with bearing