Filtrar por

Disponibilidad

Diámetro de conexión

Diámetro (D)

Longitud del cortador - altura

Largo total

Radio/ángulo

Cortadores

Fresadoras / CNC

Amplio programa de fresadoras profesionales para un resultado perfecto.

Filtros activos

  • Diámetro (D): 2,5mm
  • Diámetro (D): 28mm
BT4 2,5x40 BT4 2,5x40

BT4 2,5x40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Precio 11,00 €
BT2 2,5x40 BT2 2,5x40

BT2 2,5x40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Precio 11,00 €
ST2 2,5 x 40 ST2 2,5 x 40

ST2 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 11,00 €
ST4 2,5 x 40 ST4 2,5 x 40

ST4 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 12,00 €
ST3 2,5 x 40 ST3 2,5 x 40

ST3 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 15,00 €
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Precio 15,30 € Precio base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Precio 15,30 € Precio base 17,00 €
  • -10%
  • -10%
Bevel cutter with guide pin 30° S8mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Precio 58,50 € Precio base 65,00 €
  • -10%
  • -10%
Bevel cutter with center tip 30° S8mm Bevel cutter with center tip 30° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Precio 70,20 € Precio base 78,00 €
  • -10%
  • -10%
Tongue cutter shank 8 mm

Tongue cutter shank 8 mm

The following items are required to create the appropriate...

The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8

Precio 114,30 € Precio base 127,00 €
  • -10%
  • -10%
Volver arriba