EPROCUT Rounding over bit...
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
- -10%
- -10%
Filtrar por
Disponibilidad
Diámetro del agujero
Espesor
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 24 productos.
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Straight bit shank 8mm
Straight bit shank 8mm
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Rounding over cutter R3 S=8mm
Rounding over cutter R3 S=8mm
Rounding over cutter R3 S=-6mm
Rounding over cutter R3 S=-6mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615