Chamfer bit 38.1 mm 45°
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 23 productos.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with...
ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with 8 mm shank.
ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14°
ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14°
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Specifically designed for cutting in hinges. stair treads and...
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
Two flute solid carbide spiral bit 3 mm with 8 mm shank....
Two flute solid carbide spiral bit 3 mm with 8 mm shank. Positive (upcut) spiral.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8
Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8
Rounding over cutter R5 S8mm
Rounding over cutter R5 S8mm
Rounding over cutter R6.3 S8mm
Rounding over cutter R6.3 S8mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Face milling bit diameter 30 mm Titman FMC30-8RT
Face milling bit diameter 30 mm Titman FMC30-8RT
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
Pattern bit Z=2 D=19 L=12 S=8
Pattern bit Z=2 D=19 L=12 S=8