Dovetail Cutter 9° 9.5 x...
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
Filtrar por
Disponibilidad
Diámetro del agujero
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 20 productos.
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8