Home

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

V-Groove cutter, These cutters create a straight line of...

V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.

V-Groove cutter

V-Groove cutter

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm

Replacement tip V-Groove cutter 45 degrees

Replacement tip V-Groove cutter 45 degrees

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

Replacement tip bevel cutter with high diameter

Replacement tip bevel cutter with high diameter

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter shank 25 mm

Rounding cutter 60 x 9 x 20+2KN 45 degrees CCW N3401N0320

Rounding cutter 60 x 9 x 20+2KN 45 degrees CCW N3401N0320

Rounding cutter 60 x 9 x 20+2KN 45 degrees CW N3401N0319

Rounding cutter 60 x 9 x 20+2KN 45 degrees CW N3401N0319

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter shank 25 mm

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086