BT4 1x40
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Filtrar por
Disponibilidad
Diámetro del agujero
Espesor
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Hay 24 productos.
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, CO-superalloys, NI-superalloys, TI-superalloys
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, CO-superalloys, NI-superalloys, TI-superalloys
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for...
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines