BT4 2,0x40
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Filtrar por
Disponibilidad
Diámetro del agujero
Diámetro externo
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Hay 32 productos.
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Knife in HW R=1 N3402N0123
Knife in HW R=1 N3402N0123
Knife in HW 16.5x16x2 R=1 CCEN700013
Knife in HW 16.5x16x2 R=1 CCEN700013
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1 CCW 3401A0356
Rounding cutter with interchangeable knives 60/70X16X16+2KN R1...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R1 CW 3401A0355
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1 N3401N0431
Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130
Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130