Home

Adecuado para: aluminio, cobre, plásticos.

Adecuado para: aluminio, cobre, plásticos.

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Guttering cutter for solid surface

Guttering cutter for solid surface

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Guttering cutter with high cutting length 12 mm Shank

Guttering cutter with high cutting length 12 mm Shank

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Profile cutter RBB

Profile cutter RBB

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Stark YS107BZM Multiradius roundover cutter Light alloy body,...

Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Steel body with standard tungsten carbide profiled knives for...

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body,  R=3, 4, 5, 6, 8 and 10mm included