JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filtrar por
Disponibilidad
Diámetro del agujero
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Hay 33 productos.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Knife in HW 25 degrees CSEN700014
Knife in HW 25 degrees CSEN700014
Knife in HW 25 degrees CSEN700013
Knife in HW 25 degrees CSEN700013
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1...
Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1 piece N3402N0097
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Coving cutter with 90 degrees tangential outlet for solid surface
Coving cutter with 90 degrees tangential outlet for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Premium Half round cutter
Premium Half round cutter
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393
Stark YS107BZM Multiradius roundover cutter Light alloy body,...
Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, R=3, 4, 5, 6, 8 and 10mm included
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, R=3, 4, 5, 6, 8 and 10mm included