Filtrar por

Disponibilidad

Diámetro del agujero

Diámetro de conexión

Diámetro (D)

Longitud del cortador - altura

Largo total

Radio/ángulo

Cortadores

Home

Filtros activos

  • Radio/ángulo: 9°
  • Radio/ángulo: 30°
Dovetail Cutter 9° 9.5 x 9.5 mm ENT 15962

Dovetail Cutter 9° 9.5 x...

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

Precio 17,50 €
Bevel cutter with guide pin 30° S8mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Precio 58,50 € Precio base 65,00 €
  • -10%
  • -10%
Bevel cutter with center tip 30° S8mm Bevel cutter with center tip 30° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Precio 70,20 € Precio base 78,00 €
  • -10%
  • -10%
Bevel cutter R12,7 9° S12mm for solid surface Bevel cutter R12,7 9° S12mm for solid surface

Bevel cutter R12,7 9°...

Bevel cutter with beveled bearing for solid surface

Bevel cutter with beveled bearing for solid surface

Precio 135,90 € Precio base 151,00 €
  • -10%
  • -10%
Bevel cutter R6,35 9° S12mm for solid surface Bevel cutter R6,35 9° S12mm for solid surface

Bevel cutter R6,35 9°...

Bevel cutter with beveled bearing for solid surface

Bevel cutter with beveled bearing for solid surface

Precio 135,90 € Precio base 151,00 €
  • -10%
  • -10%
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling...

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Precio 368,00 € Precio base 460,00 €
  • -20%
  • -20%
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128 LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128

LOW-NOISE 30° degrees...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

Precio 416,00 € Precio base 520,00 €
  • -20%
  • -20%
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127

LOW-NOISE 30° pre-milling...

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

Precio 488,00 € Precio base 610,00 €
  • -20%
  • -20%
Volver arriba