Fresas de corte con filos de corte axiales

JVL pro-line solid carbide flush trim bit  S8mm

JVL pro-line solid carbide flush trim bit  S8mm

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank

ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

Fresa con guía de rodamientos para recortar los bordes...

Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.

Trimmers with bearing

Trimmers with bearing

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Fresa con guía de rodamientos para recortar los bordes...

Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing top and bottom

Trimmers with bearing top and bottom

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Trimming bevel cutter with bearing

Trimming bevel cutter with bearing

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

for simultaneous machining of top and bottom edges. For...

for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

D19 L30 S8mm Replacement tip trimmers with bearing top and bottom

D19 L30 S8mm Replacement tip trimmers with bearing top and bottom

for simultaneous machining of top and bottom edges.

for simultaneous machining of top and bottom edges.