Rounding over router bit R...
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
Filtra per
Disponibilità
Diametro attacco
Raggio/angolo
Le frese per arrotondare vengono utilizzate per creare curve sui bordi.
Disponiamo di frese per arrotondare con un raggio da 1 mm a 25 mm.
Frese arrotondatrici doppie per arrotondare entrambi i lati in un'unica operazione.
Ci sono 8 prodotti.
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Double rounding cutter with bearing
Double rounding cutter with bearing
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm