Frese a taglienti diritti per rifilare

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Pattern bit Z=2 D=19 L=20 S=8

Pattern bit Z=2 D=19 L=20 S=8

Straight bit Z=2 D=19 L=30 S=8 mm

Straight bit Z=2 D=19 L=30 S=8 mm

Pattern bit Z=2 D=19 L=12 S=8

Pattern bit Z=2 D=19 L=12 S=8