Frese per pantografi

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Cove mould cutter for solid surface

Cove mould cutter for solid surface

Guttering cutter for solid surface

Guttering cutter for solid surface

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

Profile cutter RBB

Profile cutter RBB