Frese per pantografi

Ampio programma Frese professionali per un risultato perfetto.

Filtri attivi

  • Raggio/angolo: 2,38mm
  • Raggio/angolo: 2,38mm
  • Raggio/angolo: 9,5mm
EPROCUT Rounding over bit HW R9.5 S8

EPROCUT Rounding over bit...

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

Prezzo 31,50 € Prezzo base 35,00 €
  • -10%
  • -10%
Radius engraving cutter D20 R9,5 S8mm

Radius engraving cutter D20...

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Prezzo 70,20 € Prezzo base 78,00 €
  • -10%
  • -10%
Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank

Rail- & Stile Cutter...

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Prezzo 93,00 €
Titman Staff / corner bead bit with bearing HW Z2 D38 L28 R9.5 S8 Titman Staff / corner bead bit with bearing HW Z2 D38 L28 R9.5 S8

Titman Staff / corner bead...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

Prezzo 118,80 € Prezzo base 132,00 €
  • -10%
  • -10%
Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank

Rail- & Stile Cutter...

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Prezzo 125,00 €
Torna all'inizio