Home

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa,...

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, CO-superalloys, NI-superalloys, TI-superalloys

Adatto a: Acciaio, Acciaio inossidabile, Ghisa,...

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

V-Groove cutter

V-Groove cutter

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Bevel cutter with bearing

Bevel cutter with bearing

Straight bit shank 8mm

Straight bit shank 8mm

V-Groove cutter

V-Groove cutter

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Straight bit shank 12 mm

Straight bit shank 12 mm

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

T-Slot cutter with radius

T-Slot cutter with radius

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Profile mould cutter

Profile mould cutter

The following items are required to create the appropriate...

The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8