Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse...
PCD Rounding cuttter 58x10.5x16 R=3 CCEN350168 for Biesse Machines
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding cuttter 58x10.5x16 R=2 CCEN350169
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Rounding cuttter 58x10.5x16 R=1.5 CCEN350171
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse...
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 For Biesse Akron 1100
