Straight Cutter TC Z2 D18...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 21 prodotti.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight bit shank 8mm
Straight bit shank 8mm
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Rounding and formatting cutterR3 S=8mm
Rounding and formatting cutterR3 S=8mm
for simultaneous machining of top and bottom edges. For...
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8