Filtra per

Disponibilità

Diametro attacco

Diametro (D)

Lunghezza taglierina - altezza

Lunghezza totale

Raggio/angolo

Frese

Home

Filtri attivi

  • Lunghezza taglierina - altezza: 12,7mm
  • Lunghezza taglierina - altezza: 38mm
Straight Cutter TC Z1 HM D6 S8mm

Straight Cutter TC Z1 HM...

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Prezzo 15,90 €
Straight Cutter TC Z1 D3 L12 S8m

Straight Cutter TC Z1 D3...

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Prezzo 16,00 €
ENT Dovetail cutter TC 14° 12.7 x 12.7 mm

ENT Dovetail cutter TC 14°...

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

Prezzo 24,55 €
Dovetail Cutter 14° 14.3 x 12.7 mm ENT 15966

Dovetail Cutter 14° 14.3 x...

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

Prezzo 25,00 €
Trimmer con cuscinetto D6,35 S8mm Trimmer con cuscinetto D6,35 S8mm

Trimmer con cuscinetto...

Taglierina guida per cuscinetti per rifilare impiallacciature...

Taglierina guida per cuscinetti per rifilare impiallacciature e bordi in plastica sporgenti. È anche possibile copiare utilizzando un modello. I diametri piccoli sono ideali per la lavorazione degli angoli interni.

Prezzo 38,70 € Prezzo base 43,00 €
  • -10%
  • -10%
AS2 20,0x104 AS2 20,0x104

AS2 20,0x104

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Prezzo 44,00 €
ENT Rebate Cutter TC with Set of Ball Bearings 34.9 mm

ENT Rebate Cutter TC with...

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm...

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm with 8 mm shank

Prezzo 69,00 €
Trimmer D12.7 L38 S12mm with double bearing

Trimmer D12.7 L38 S12mm...

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Prezzo 98,10 € Prezzo base 109,00 €
  • -10%
  • -10%
Trimmer D12.7 L38 S8mm with double bearing

Trimmer D12.7 L38 S8mm...

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Prezzo 98,10 € Prezzo base 109,00 €
  • -10%
  • -10%
Torna all'inizio