Home

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Bearing guide trimmer Z2 for solid surface Suitable for...

Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Bevel cutter for solid surface

Bevel cutter for solid surface

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Bearing guide trimmer Z=2 for solid surface

Bearing guide trimmer Z=2 for solid surface

Guttering cutter for solid surface

Guttering cutter for solid surface

Titman professional dovetail router bit 15 degrees with Shank...

Titman professional dovetail router bit 15 degrees with Shank 12mm and Diameter 26mm