Spiral finishing cutter D10...
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
- -10%
- -10%
Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Frese
Ci sono 19 prodotti.
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2