Home

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086