Home

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting