Filtra per

Disponibilità

Diametro del foro

Diametro attacco

Diametro (D)

Lunghezza taglierina - altezza

Lunghezza totale

Raggio/angolo

Frese

Home

Filtri attivi

  • Raggio/angolo: 14,2mm
  • Raggio/angolo: 30°
Bevel cutter with guide pin 30° S8mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Prezzo 58,50 € Prezzo base 65,00 €
  • -10%
  • -10%
Bevel cutter with center tip 30° S8mm Bevel cutter with center tip 30° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Prezzo 70,20 € Prezzo base 78,00 €
  • -10%
  • -10%
Bevel cutter 30° S8mm with bearing and high cutting length Bevel cutter 30° S8mm with bearing and high cutting length

Bevel cutter 30° S8mm...

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Prezzo 92,70 € Prezzo base 103,00 €
  • -10%
  • -10%
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling...

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Prezzo 368,00 € Prezzo base 460,00 €
  • -20%
  • -20%
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128 LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128

LOW-NOISE 30° degrees...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

Prezzo 416,00 € Prezzo base 520,00 €
  • -20%
  • -20%
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127

LOW-NOISE 30° pre-milling...

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

Prezzo 488,00 € Prezzo base 610,00 €
  • -20%
  • -20%
Torna all'inizio