Home

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Knife in HW R=1 N3402N0123

Knife in HW R=1 N3402N0123

Knife in HW 16.5x16x2 R=1 CCEN700013

Knife in HW 16.5x16x2 R=1 CCEN700013

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter R15 S=10mm

Rounding over cutter R15 S=10mm

Rounding over cutter R15 S=12mm

Rounding over cutter R15 S=12mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Rounding cutter with interchangeable knives 60/70X16X16+2KN...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1 CCW 3401A0356

Rounding cutter with interchangeable knives 60/70X16X16+2KN R1...

Rounding cutter with interchangeable knives 60/70X16X16+2KN R1 CW   3401A0355

Premium Half round cutter

Premium Half round cutter

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Profile mould cutter

Profile mould cutter

Tilted trimmer with interchangeable knives 75x20x16+2KN R=1...

Tilted trimmer with interchangeable knives 75x20x16+2KN R=1 N3401N0431

Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130

Trimmer 73.21/69.8x16x16+2KN r=1 LH CCEN350130

Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284

Rounding cutter 60 x 9 x 20+2KN R1 CW N3401N0284