BT2 4,5x50
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 19 prodotti.
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127