BT4 4,0x50
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 16 prodotti.
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron...
Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron 1 piece
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
Knife in HW 16.5x16x2 R=2 CCEN700007
Knife in HW 16.5x16x2 R=2 CCEN700007
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Knife in HW R=2 CSEN700020
Knife in HW R=2 CSEN700020
Knife in HW R=2 CSEN700019
Knife in HW R=2 CSEN700019
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Edge scraper with anti-bleaching profile R=2 3402A0126
Edge scraper with anti-bleaching profile R=2 3402A0126
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Titman rounding over cutter R=2 S=8
Titman rounding over cutter R=2 S=8