- Home
-
- Frese per pantografi
- Frese per legno
- Frese a raggio concavo
- Frese a taglienti diritti per canali
- Frese per mortasare
- Frese per giunzioni snodabili
- Frese per smussare
- Frese per unione a code di rondine
- Frese per rifilare a taglienti assiali
- Frese a doppi canali diritti
- Frese elicoidali
- Frese a taglienti diritti per rifilare
- Frese a disco
- Frese a mezzo tondo
- Frese per intagli a V
- Fresa a taglienti diritti per sede guarnizioni per serramenti
- Frese per serrature
- Frese profilate per ante e finestre
- Frese a raggio convesso
- Frese per incastri maschio/femmina
- Frese a gradino
- Fresa per antine
- Barley twist cutter
- Frese profilate
- frese per incollaggio adesivo
- Frese per materiali compositi
- Frese per plastica
- Frese per metallo
- Fresa Per Alluminio, ALUCOBOND, DiBOND, REYNOBOND
- Frese per finestre e porte
- Frese in diamante policristallino
- Parti
- Pinze e accessori
- Frese per legno
- Utensili per macchine toupie
- Teste per scanalatura
- Teste di taglio a quarto di giro
- Teste di taglio per giunzione
- Testa portacoltelli per smussi
- Testa di taglio per pannelli rialzata
- Teste portacoltelli in battuta
- Teste portacoltelli per serramenti
- Testa portacoltelli profilo-controprofilo
- Teste portacoltelli maschio-femmina
- Teste di progettazione
- Altre teste di taglio
- Componenti
- Teste portacoltelli per macchine Biesse
- Coltelli intercambiabili
- Lame circolari
- Punte per macchine foratrici
- Cuscinetti
- Diametro interno fino a 10 mm
- Diametro interno 1,5 mm
- Diametro interno 2 mm
- Diametro interno 2,38 mm - 3/32 inch
- Diametro interno 2,5 mm
- Diametro interno 3 mm
- Diametro interno 3,17mm - 1/8 inch
- Diametro interno 4mm
- Diametro interno 4,75mm - 3/16 inch
- Diametro interno 5mm
- Diametro interno 6mm
- Diametro interno 6,35mm - 1/4 inch
- Diametro interno 7mm
- Diametro interno 7,94mm - 5/16 inch
- Diametro interno 8mm
- Diametro interno 9mm
- Diametro interno 9,52mm - 3/8 inch
- Diametro interno da 10 a 20 mm
- Diametro interno 20 mm e superiore
- Diametro interno fino a 10 mm
- Virutex
- Macchine
- Accessori
- Materiali di consumo
- Componenti
- AB11C Parti
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parti per macchine CE
- Parti per macchine EB
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parti per macchine FR
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parti per macchine TM
- RZ170N Parts
- RZ70M Parts
- Other parts
- Altri prodotti
- Sale
- Frese per pantografi
Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Home
Ci sono 36 prodotti.
BT4 8,0x65
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
BTXL2 8,0x140
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Radius engraving cutter D13...
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
- -10%
- -10%
Radius engraving cutter D13...
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Titman rounding cutter...
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
- -10%
- -10%
Guttering cutter R4 S12mm...
Guttering cutter for solid surface
Guttering cutter for solid surface
- -10%
- -10%
Ball nose Spiral cutter. D8...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
- -10%
- -10%
Titman Staff / corner bead...
Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14...
Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14 R=3,2 S=8
- -10%
- -10%
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
- -10%
- -10%
Rounding over cutter R4 S6mm
Rounding over cutter R4 S=6mm
Rounding over cutter R4 S=6mm
- -10%
- -10%
Ball nose Spiral cutter. D8...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
- -10%
- -10%
Titman flute bit R4 S8mm
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
- -10%
- -10%
Diamond PCD rounding over...
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Half round profile cutter...
Half round profile cutter
Half round profile cutter
- -10%
- -10%
concave and convex quarter...
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
- -15%
- -15%
Quarter radius set R...
Stark YS107BZM Multiradius roundover cutter Light alloy body,...
Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case
- -15%
- -15%
Concave and convex quarter...
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
- -15%
- -15%
Concave and convex quarter...
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
- -15%
- -15%
Concave and convex quarter...
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
- -15%
- -15%