Rounding over router bit R...
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 40 prodotti.
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron...
Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron 1 piece
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
Knife in HW 16.5x16x2 R=2 CCEN700007
Knife in HW 16.5x16x2 R=2 CCEN700007
Knife in HW R=2 N3402N0125
Knife in HW R=2 N3402N0125
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Knife in HW R=2 CSEN700020
Knife in HW R=2 CSEN700020
Knife in HW R=2 CSEN700019
Knife in HW R=2 CSEN700019
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Edge scraper with anti-bleaching profile R=2 3402A0126
Edge scraper with anti-bleaching profile R=2 3402A0126
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Titman rounding over cutter R=2 S=8
Titman rounding over cutter R=2 S=8
Knuckle bone cutter for solid surface
Knuckle bone cutter for solid surface
T-Slot cutter with radius
T-Slot cutter with radius
T-Slot cutter with radius
T-Slot cutter with radius
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=2 CCW 3401A0350
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=2 CW 3401A0349