JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filtra per
Disponibilità
Diametro esterno
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 22 prodotti.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Guttering cutter for solid surface
Guttering cutter for solid surface
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8