Per plastica

Frese per la lavorazione della plastica.

Shop by Category

Filtri attivi

  • Lunghezza totale:38 mm clear
  • Lunghezza totale:85mm clear
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
12,00 € -15% 10,20 €
1 in magazzino
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
15,00 € -15% 12,75 €
1 in magazzino
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
17,00 € -15% 14,45 €
1 in magazzino
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
17,00 € -15% 14,45 €
1 in magazzino
Spiral cutter Positiv for Plastics D3 L12 S3mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D3 L12 S3mm

Ref: AC3-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
17,00 € -15% 14,45 €
1 in magazzino