Router bits

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Specifically designed for cutting in hinges. stair treads and...

Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas

Two flute solid carbide spiral bit 3 mm with 8 mm shank....

Two flute solid carbide spiral bit 3 mm with 8 mm shank. Positive (upcut) spiral.

Rounding over cutter R6,3 S=6mm

Rounding over cutter R6,3 S=6mm

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Rounding over cutter R5  S8mm

Rounding over cutter R5  S8mm

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Face milling bit diameter 30 mm Titman FMC30-8RT

Face milling bit diameter 30 mm Titman FMC30-8RT

Replacement tip rebate cutter with bearing

Replacement tip rebate cutter with bearing

Profile cutter ROG20

Profile cutter ROG20

Pattern bit Z=2 D=19 L=12 S=8

Pattern bit Z=2 D=19 L=12 S=8

Bearing guide cutter for trimming protruding veneer and...

Bearing guide cutter for trimming protruding veneer and plastic edges.

Face milling bit diameter 45 mm Titman FMC45-12RT

Face milling bit diameter 45 mm Titman FMC45-12RT

Replacement tip rebate cutter with bearing

Replacement tip rebate cutter with bearing

Face milling bit D=55 L=12 S=16

Face milling bit D=55 L=12 S=16

Face milling bit D=55 L=12 S=12

Face milling bit D=55 L=12 S=12

Face milling bit D=80 L=12 S=16mm

Face milling bit D=80 L=12 S=16mm