Eco-line


  • -20%
PCD straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€60.00 -20% €48.00
1 in stock
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€65.00 -20% €52.00
Out of stock, please inquire about delivery time
  • -20%
  • New
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€72.52 -20% €58.02
Out of stock, please inquire about delivery time
  • -20%
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€72.52 -20% €58.02
Out of stock, please inquire about delivery time
  • -20%
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€72.52 -20% €58.02
8 in stock
  • -20%
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€72.52 -20% €58.02
4 in stock
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€72.52
Out of stock, please inquire about delivery time
  • -20%
  • New
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€96.68 -20% €77.34
2 in stock
  • -20%
  • New
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€96.68 -20% €77.34
Out of stock, please inquire about delivery time
  • -20%
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€96.68 -20% €77.34
1 in stock
  • -20%
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€96.68 -20% €77.34
2 in stock
  • -20%
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€96.68 -20% €77.34
2 in stock
  • -20%
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€96.68 -20% €77.34
2 in stock
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
  • -20%
  • New
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€120.84 -20% €96.67
Out of stock, please inquire about delivery time
  • -20%
  • New
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€120.84 -20% €96.67
Out of stock, please inquire about delivery time
  • -20%
  • New
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€120.84 -20% €96.67
Out of stock, please inquire about delivery time
  • -20%
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€120.84 -20% €96.67
1 in stock
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€138.00 -20% €110.40
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€138.00 -20% €110.40
Out of stock, please inquire about delivery time
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€138.00 -20% €110.40
Out of stock, please inquire about delivery time
  • -20%
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€145.00 -20% €116.00
1 in stock
  • -20%
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€164.00 -20% €131.20
Out of stock, please inquire about delivery time